Witness the MV F4 License Plate Relocator Kit... yet another Pirate's Lair Exclusive! We all know that the MVF4 has the best looking ass out there, discounting Brittany Spears, of course. Why have that "fugly" rear fender and blinkers cluttering things up when you can have simplicity and beauty personified with this kit? Here's our solution. Install is under 15 minutes after you've gotten the rear fender removed. And unlike the other license plate relocator kits on the market, ours allows the customer to retain the rear factory reflector... as God intended. Each kit is made of ultra-light black anodized aluminum and furnished with stainless hardware. Of course when you remove the rear fender.. you'll need blinkers. Check out our Hyper Lite MV Kit for the best alternative rear lighting available for the F4.
Aftermarket Exhaust Compatibility: Our kit is designed for use with the stock exhaust system only. It may or may not be compatible with an aftermarket exhaust. We know for a fact that it will NOT work with Casoli exhausts, but there are at least 8 other F4 systems on the market that we've never even seen. Our kit uses the (2) under-exhaust screws for attaching. If you do NOT have these screws (see pic) most likely our kit will not work on your F4.


Note: Our kit accommodates standard US size 7" x 4" plates. Check your plate dimensions before ordering. Also... Not all of us are created equal.. some are heavy.. and some us us have our suspensions softer than others. I always recommend you check for plate relocator bracket clearance with the tire on a short ride before fully tightening everything. If you think your plate bracket is gonna make contact with the tire... adjust accordingly. Lastly.. we tested these with up to a 200lb rider for clearance when suspension is compressed with no problems. If you are carrying a passenger and you exceed the 200lbs OR you are at or near 200lbs yourself and live in an area with pot holes, you could bottom your plate on the tire bending both the plate and our bracket. We suggest you keep this in mind when ordering. You have been warned. Fits every model year MV Agusta F4 and the 1000cc F4

How -To Install the MVF4 Plate Relocator Kit Click Here

MVF4 Plate Relocator Kit $75.US (Fed/Ex Ground Included) In Stock!

Home * Choose Your Bike* Contact Page * Order Page * Disclaimer * Customer Comments * Newsletter * How-To * Staintune