![]() |
![]() |
![]() |
![]() |
BMW K1200R / R Sport Product Page SITE NAVIGATION: Click the Product Name or Picture below to reach the item's web page. Once there, click on the Price to reach the Order Page or order directly by clicking on the PayPal button. Please read DISCLAIMER before ordering. For credit card orders, call us at 828.628.7093 ESTNote: All prices include Fed/Ex Ground shipping in the USA unless otherwise noted. and yes...We ship FedEx internationally! International customers will be notified of shipping costs after purchase or before upon e-mail request.
|
|
BMW K1200R / R SPORT PERFORMANCE
|
![]() |
Evoluzione
Race Airflow System This
performance kit allows the K1200R or K1200R Sport motor to "breathe"
much easier. The kit includes dual high performance air filters which
are mounted to the factory airbox with some strikingly beautiful CNC'd
billet 6061-T6 brackets. Typical power increase of the kit is an
additional 6hp at the rear wheel along with crisper throttle response
and more torque. Also important, the filters utilize a cotton gauze material
that can be cleaned & reused. Install is a simple bolt-on affair involving
no modifications to your bike. Typical install time is about 1 hour and/or
1 beer. The kit works well with both stock and every brand aftermarket
exhaust. Does it get any simpler? A terrific bang for your HP dollar. Fits
the BMW K1200R and K1200R Sport. Pirates' Price $280.US Pair (Fed/Ex shipping in the US included) |
![]() |
Remus PowerCone from Austria. The Remus PowerCone Slip-On, with it's innovative conical design, transforms the BMW K1200R into Moto GP look-alikes. Slightly modified Revolution technology was used to enhance power and deliver a wonderful, thoroughbred sound.. the usual hallmark of Remus exhausts. FYI.. this is the pipe I have on my own K1200S. The sound is only slightly louder than the Revolution.. Perfect. Remus offers 3 PowerCone options for the K1200R. An all Stainless Steel, Titanium, and a sweet looking Stainless with Black sleeve. These slip-ons offer about 3-5hp gain and a 12.5 lb weight loss. Check out our dyno chart ...Fits the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $720.US (Ground Shipping in US Included) |
![]() |
Remus
Exhaust Systems from
Austria. The entire line of Remus pipes guarantee increased mid-range
and bottom end power, reduced weight, and a deep throaty tone. Remus offers
5 options of exhausts for the K1200R. First they offer (3) SLIP-ONS ...Aluminum,
Carbon Fiber, and the ultra light Titanium. The slip-ons offer about 4hp
gain and god knows how much of a weight loss. Need more? of course you
do...Are we not men??!! We also offer 2 complete 4-2-1 full exhaust systems.
A stainless steel header version with Ti-Oval canister and an ALL titanium
version weighing in at a waif-ish .. ( can you believe this??!!)..10lbs
complete! Check out our dyno charts ... the full systems offer a full
11hp gain over the stock bike.
Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price Slip-On's from $625.US Aluminum Slip-Ons (Ground shipping in US Included) |
![]() |
Two
Brothers K1200R Exhausts Slip-Ons Pirates' Lair is proud
to offer 5 different slip-on systems from the world renowned Two
Brothers Racing. With the Two Brothers Racing Slip-On's, you'll
pick up up to 3.5hp for the 2005+ BMW K1200R and an extra 5.4hp for the
'05+ BMW K1200S. Choose from Polished Aluminum, Titanium, Carbon Fiber
and two choices of canister styles. The small oval M-2 features an exclusive
Teflon coated, cast magnesium outlet that not only looks great but also
allows for various silencer inserts. The large oval C-5, like the M-2
incorporates exclusive technology and premium construction material. Sound
is about the same..Unlike other vendors, our price includes the Two Bros optional P1 sound diffuser. Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $590.US Aluminum or $ 690.US Ti/CF (Fed/Ex Ground in US Included) |
![]() |
Laser
K1200R Exhaust Systems As the official exhaust supplier
for the brand new BMW MOTORRAD POWERCUP, Laser has developed a street
legal "replica" version of their high performance racing system
for the BMW K1200R.. the HOTCAM. On the menu...the
3 Laser slip-on options and 3 full 4-2-1 systems for your BMW K1200R.
Besides the HOTCAM, we also offer two versions of the
Laser DuoTech Canisters
. .. a Stainless Steel version and the ultra-light Titanium.
All offer a throaty
sound. All 6 kits, slip-on for full 4-2-1 systems come with (2) removable
baffles, one sporty the other more 'street legal'. 60% lighter than stock.
All eliminate the factory cat.
Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $480.US Stainless Steel or $660.US Ti HOTCAM (Fed/Ex Ground in US Included) |
![]() |
Staintune
Slip-On Exhaust Staintune of Australia, has carved
a superior reputation since 1980 as the premier manufacturer of exquisite
hand crafted stainless steel exhaust systems. When you purchase a Staintune
product you will not only have a high performance exhaust system with
jaw dropping quality, sleek lines and a note you could dance to, you will
have it for life. Their S / R version slip-on adds 10 hp and heaps of
low end torque. Comes standard with removable baffle. No re-packing. fit
both the K1200R and K1200S. All mounting hardware included. Speeding tickets
are optional. Staintune's goal... to enhance
overall dynamic response throughout the rev range. . Boms Away
Metal Polish sold, too.
We
also sell Staintunes for Aprilia, Ducati,
Kawasaki, KTM, Moto
Guzzi, Suzuki, Triumph,
and Yamaha. For pricing for all
these bikes Click
HERE Pirates' Price $600.US (Fed/Ex Ground Included) |
![]() |
ZTechnik
Exhaust System Experience improved torque and a higher
peak power on your R with a choice of exhaust systems from ZTechnik.
We offer both a Ti slip-on system AND a full Titanium system for your
bike. The Slip-On
produces a solid boost in torque and a few extra ponies with reduced weight
and the stunning appearance of finely finished titanium. The full system
(which offers a smaller canister) offers a substantial HP/ torque gain
and serious weight loss. No mods necessary. A removable dB killer silencer
is included with the slip-on's only. FYI..the full system is NOT center
stand compatible. Approved
by BMW dealers worldwide. No warranty issues.
Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price Ti Slip-On's $720.US / Full Ti System $1895.US (Fed/Ex Ground Included) |
|
BMW
K1200R / R SPORT TRACK DAYS / ROAD RACING |
![]() |
R &
G Racing K1200R / R Sport Frame Sliders
Imported from the UK. Protect your K1200R or R Sport from the ugliness
of going down with these British-made frame sliders. We offer the upper
sliders (sold in pairs only) as well as front axle and rear drive shaft
slider kits. ! These are available in black only. Doing track days? Deals
Gap warrior? Alcoholic? Lesson the damage of a drop with a little aftermarket
insurance! Kit comes with very detailed directions for a chimp-easy install.
Fits
the BMW K1200R and K1200R Sport.
Pirates' Price $100.US Pair (Fed/Ex shipping in the US included) |
![]() |
R &
G Racing Shaft Protector Imported
from the UK. Protect your K1200R or K1200R Sport from the ugliness
of going down with this British-made drive shaft/swingarm slider. There
is nothing more important than protecting one's shaft. No mods or drilling
necessary. Protects the left side only. We also offer the upper frame
sliders (sold in pairs only) as well as the front fork slider kits as
well as package deals.. ! These are available in black only. Doing track
days? Deals Gap warrior? Alcoholic? Lesson the damage of a drop with a
little aftermarket insurance! Simple chimp-easy install with very detailed
directions.
Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $48.US (Fed/Ex shipping in the US included) |
![]() |
R &
G Racing Fork Sliders
Imported
from the UK. Protect your K1200R or K1200R Sport from the ugliness
of going down with these British-made front fork sliders. No mods or drilling
necessary. We also offer the upper sliders, (sold in pairs only) and a
rear drive shaft slider kit! These are available in black only. Doing
track days? Deals Gap warrior? Alcoholic? Lesson the damage of a drop
with a little aftermarket insurance! Simple install with very detailed
directions.
Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $63.US Pair (Fed/Ex shipping in the US included) |
![]() |
R &
G Racing Case Protectors Imported
from the UK. Protect your K1200R or K1200S from the ugliness of going
down with this British-made drive shaft/swingarm slider. Sold in pairs.
No mods or drilling necessary. Protects both the left and right side engine
cases. We also offer the upper frame sliders (sold in pairs only) as well
as the front fork slider kits as well as package deals.. ! These are available
in black only. Doing track days? Deals Gap warrior? Alcoholic? Lesson
the damage of a drop with a little aftermarket insurance! Simple chimp-easy
install with very detailed directions.
Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $67.US (Fed/Ex shipping in the US included) |
![]() |
TechSpec
"R" Gripster Tank Grips Sliding forward when coming to a stop? Scuffing up your tank with your
knees and jacket? Your wife sliding off the bike during late night garage
sex? If you want grip AND protection.. Here's one solution. By gripping
the tank with your legs, a rider can improve the overall control of a
motorcycle, control of their body weight, and obtain a more positive seat
position. Improved control of the riders body weight will help improve
overall handling. Increased control equals a smoother, less fatigued,
and more enjoyable ride. The peel-n-stick material is a rubber product only.125” thick with
a low profile diamond grip pattern to help increase the coefficient of
friction. Perfect for aggressive, higher skilled, track day riders. Each
(3) piece kit includes R & L Grip Skins and one Tank Protector. I
have this on both my K1200S and my R1 trackbike and swear by it. Fits
the BMW K1200R and K1200R Sport. Pirates' Price $50.US (Fed/Ex Ground in US Included) |
|
BMW
K1200R ERGONOMICS
|
![]() |
American Machine
K1200S / K1200R Peg Relocator Kit Available
in either black or clear anodized, these 6061-T6 billet aluminum brackets
allow for a more comfortable riding position by moving the stock footpegs
down approximately one inch. The easy to install kit comes complete with
stainless steel mounting hardware. This US made lowering kit is a simple
plug-n-play bolt on with no mods or weird issues allowing for a little more
leg room. Lowers your pegs a full 1.25". Unlike the more expensive Verholen kit, the American Machine kit is NOT adjustable. Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $130.US Silver or Blk (Fed/Ex Ground in US Included) Comin Soon! New Product! ! |
![]() |
Verholen
K1200R Peg Lowering Kit A Pirates' Lair Exclusive! MV
Verholen Of Germany
delivers
yet again with this impressive peg lowering kit. Crafted out of T-6 aluminum,
they are light as a feather and strong as factory. Just what you need for
cramped legs and/or bad ergonomics. This German made lowering kit will lower
the pegs by between 40 - 60 mm. Bad knees? Join
the club.. Do something about it nd stop whining. With the Verholen kit,
the actual pegs are adjustable. Shift
lever extension available as an option. Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $185.US (Fed/Ex Ground in US Included) |
![]() |
K1200S
/ K1200R Brake Lever Extension A Pirates' Lair Exclusive! Big boots and a small
brake lever make for a bad combination. Pirates' Lair offers and easy solution.
This brake lever adapter, which is imported from Hornig of Germany, fits directly over the existing brake
lever giving you the extra length your wife dreams about. Problem solved. This
slip-on enlargement makes for safer braking and easier accessibility. Simple install
using a (2) furnished set screws. Also.. for those who have installed the Verholen Peg Lowering Kit.. this compliments that kit as it brings the
brake lever out similarly to the new peg position. Fits
the BMW K1200S, K1200R, K1200R Sport,. and 06 & Up K1200GT Pirates' Price $66.US (Fed/Ex Ground in US Included) New Product! |
![]() |
K1200R
Shift Lever Extension A Pirates' Lair Exclusive! Big boots and a small
shift lever make for a bad combination. Pirates' Lair offers and easy solution.
This shift lever adapter, which is manufactured exclusively for us right
here in the USA by a fellow BMW rider, fits directly over the existing shift
lever giving you the length your wife dreams about. Problem solved. This
enlargement makes for safer shifting and easier accessibility. Simple install
using a single set screw. Also.. for those who have installed the Verholen Peg Lowering Kit.. this compliments that kit as it brings the
shift lever out similarly to the new peg position. Fits
the BMW K1200S, K1200R, K1200R Sport,
and K1200RS/GT Pirates' Price $39.US (Fed/Ex Ground in US Included) |
![]() |
Throttlemeister A Pirate's
Lair Exclusive! Witness the world's first
K1200R throttle-lock produced exclusively for Pirates' Lair by world
renowned Throttlemeister™.. In
case you are not familiar with the product, it is essentially a bar end,
mechanical, cruise control for your motorcycle. Tired of a numb throttle
hand? Ready to stop and rest your hand after less than 30 minutes in the
twisties? Stupid question, huh? Here's the first and only solution, my friends
and yes.. it will
work with the heated grips. You'll be spoiled after your first ride. Easy 30 minute install. We
offer these in both the standard Silver and a baked-on Black finish. Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $140. US Silver / $150.US Black (Fed/Ex Ground in US Included) |
|
BMW K1200R / R SPORT CARBON FIBER
|
![]() |
Pack Parts
Carbon Fiber K1200R / K1200R Sport
You want Carbon Fiber? We got your back. This isn't that faux crap that
others sell. The Pack Parts carbon fiber cloth really comes alive under
the crystal clear poured resin topcoat giving it a deep appearance. Even
the edge quality makes a fluid transition onto the bodywork. Worthy of the
mighty K1200R or R Sport. Top quality even by my anal standards. In case you are curious, the Carbon Fiber pattern of Pack Parts products is an exact match for the patterns
of both ZTechnik and Ilmberger Carbon Fiber products so there is no issue
with mixing and matching. We offer the entire line of
the German made Pack
Parts Carbon Fiber products via special order. Call 828.628.7093 EST.
Click
in this section for a listing of every piece of carbon fiber we sell for
the K1200R, including ZTechnik and Ilmberger. Pirates' Price $150.US and up (Fed/Ex Ground in the US included) New Products Arriving Weekly!! |
![]() |
K1200R
Carbon Fiber Clutch Cover from
Pack Parts of Germany. OK..
You want Carbon Fiber? We got your back. This isn't that faux crap that
others sell. The Pack Parts carbon fiber cloth really comes alive under
the crystal clear poured resin topcoat giving it a deep appearance. Even
the edge quality makes a fluid transition onto the bodywork. Worthy of the
mighty K1200R. Top quality even by my anal standards. In case you are curious, the Carbon Fiber pattern of Pack Parts products is an exact match for the patterns
of both ZTechnik and Ilmberger Carbon Fiber products so there is no issue
with mixing and matching. We
will soon offer the entire line of Pack
Parts Carbon Fiber products via special order. Call 828.628.7093 EST Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $175.US (Fed/Ex Ground in the US included) |
![]() |
K1200R
Carbon Fiber Exhaust Hanger from
Pack Parts of Germany. This exhaust hanger
was designed for Laser canisters, but I am using one on my Remus PowerCone.
I'll suspect that these would work with many other brand canisters, but
at this point.. I really don't know which. I do know it looks trick as hell
on my K1200S. Here it
is on my K1200S.. In case you are curious, the Carbon Fiber pattern of Pack Parts products is an exact match for the patterns
of both ZTechnik and Ilmberger Carbon Fiber products so there is no issue
with mixing and matching. Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $175.US (Fed/Ex Ground in the US included) |
![]() |
K1200R
Carbon Fiber Hugger from
Pack Parts of Germany. OK..
You want Carbon Fiber? We got your back. This isn't that faux crap that
others sell. The Pack Parts carbon fiber cloth really comes alive under
the crystal clear poured resin topcoat giving it a deep appearance. Even
the edge quality makes a fluid transition onto the bodywork. Worthy of the
mighty K1200R. Top quality even by my anal standards. In case you are curious, the Carbon Fiber pattern of Pack Parts products is an exact match for the patterns
of both ZTechnik and Ilmberger Carbon Fiber products so there is no issue
with mixing and matching. We
will soon offer the entire line of Pack
Parts Carbon Fiber products via special order. Call 828.628.7093 EST Fits
the BMW K1200S, K1200R, K1200R Sport, and 06 & up K1200GT. Pirates' Price $340.US (Fed/Ex Ground in the US included) |
![]() |
ZTechnik
Carbon Fiber Gas Cap Cover Nothing says.. "Top O' the
world, ma" like this genuine carbon fiber tank protector from ZTechnik.
This isn't that faux crap that others sell. The Z carbon fiber cloth really
comes alive under the crystal clear poured resin topcoat giving it a deep
appearance. ZTechnik really hit the mark on this one. Even the edge quality
makes a fluid transition onto the bodywork. Worthy of the baddest BMW ever
made.. the K1200R. Possibly the finest looking gas cap cover I have ever
seen. Fits virtually any BMW. Pirates' Price $60.US (Fed/Ex Ground in the US included) |
![]() |
ZTechnik
K1200R / R Sport Carbon Fiber Pirates Lair offers
either a gas cap cover, a tank protector, or this complete 5
piece kit which includes
2 piece triple clamp trim, forward gas tank section, and a gauge cover.
Protect your beautiful paint job from daily use, zippers, buckles, leathers
with these genuine carbon fiber pieces from ZTechnik. This isn't that faux crap
that others sell. The Z carbon fiber cloth really comes alive under the
crystal clear poured resin topcoat giving it a deep appearance. Even the
edge quality makes a fluid transition onto the bodywork. In case you are curious, the Carbon Fiber pattern of ZTechnik products is an exact match for the patterns of
both Pack Parts and Ilmberger Carbon Fiber products so there is no issue
with mixing and matching.
Fits the K1200R only.
Pirates' Price "R" Tank Protector $65.US / 5 Piece"R" CF Trim Kit $80.US (Fed/Ex Ground in the US included) |
![]() |
K1200R
Carbon Fiber Front Fender from
Pack Parts of Germany. OK..
You want Carbon Fiber? We got your back. This isn't that faux crap that
others sell. The Pack Parts carbon fiber cloth really comes alive under
the crystal clear poured resin topcoat giving it a deep appearance. Worthy
of the mighty K1200R. While it could be fitted to the Sport with the proper hardware, it really is not designed for the Sport as the exposed portion of the tab would be rather fugly, IMHO. Top quality even by my anal standards. In case you are curious, the Carbon Fiber pattern of Pack Parts products is an exact match for the patterns
of both ZTechnik and Ilmberger Carbon Fiber products so there is no issue
with mixing and matching. We
will soon offer the entire line of Pack
Parts Carbon Fiber products via special order. Call 828.628.7093 EST Fits
the K1200R Only. Pirates' Price $340.US (Fed/Ex Ground in the US included) |
![]() |
Carbon
Fiber K1200R Sport Fender from Pack
Parts of Germany. OK.. You want Carbon Fiber?
We got your back. This is the same fender that goes on the K1200S... The Pack Parts carbon fiber cloth really comes alive under
the crystal clear poured resin topcoat giving it a deep appearance. Even
the edge quality makes a fluid transition onto the bodywork. Worthy of the
mighty K1200R Sport. Top quality even by my anal standards. In case you are curious, the Carbon Fiber pattern of Pack Parts products is an exact match for the patterns
of both ZTechnik and Ilmberger Carbon Fiber products so there is no issue
with mixing and matching. We offer the entire line of Pack
Parts Carbon Fiber products via special order. Call 828.628.7093 EST Fits
the 06+K1200GT, K1200R Sport, and K1200S. Pirates' Price $330.US (Fed/Ex Ground in the US included) |
|
GPS & RADAR DETECTOR & CAMERA ACCESSORIES
|
![]() |
Pirates'
Lair Stealth Radar Detector Mount A Pirates' Lair Exclusive!
I've out done myself this time. The Stealth radar detector
mount is my first in-house design project for the K1200R and it has turned
out wonderfully. Supremely sleek and functional, it looks factory on any
bike. The powder coated black, all aluminum, lightweight mount mounts
over the K1200R clutch reservoir cap in under 2 minutes via 2 set-screws
offering a perfect, level platform for
virtually any radar detector on the market including your
V1, Passport, or
Bel. Once installed, your detector will
NOT block any gauges yet will be perfectly visible from the saddle. Velcro
included.
Fits
the BMW K1200S, K1200R, K1200R Sport,
R1200GS, R1200R, and R1200ST. |
![]() |
ZTechnik Radar Detector Tech Mount Looking for a
way to mount a radar detector? a GPS? a cell phone? Toll transponder?
XM Radio? Check out this sleek, compact mount that attaches the the handlebar
controls vertical pinch bolts. The
BMW control mount matches the bikes form and style, while providing a
safe, secure mounting location for a wide variety of accessories. Range
of movement and adjustability are the same as all TECHMOUNT ball and socket
systems and maybe mounted on clutch or brake side. Fits
virtually all radar detectors. Sleek,
small, sexy. We
also carry a mount for the 2006 K1200GT!! Fits the K1200R, K1200S , K1200R-Sport, R1200GS, R1200ST. Pirates' Price $80.US (Fed/Ex Ground in the US included) |
![]() |
H.A.R.D.
Radar Detector Warning
Imagine getting a radar detector alert inside your helmet..no wires, no
blaring speakers. The Inside Helmet Visual Alert a.k.a .H.A.R.D. provides
an immediate visual alert: a flashing LED light , inside the helmet that
is illuminated within your field of vision allowing immediate recognition
of radar. After testing a unit for almost a year, I'm very happy with it's
performance. As there are no wires, the 5 minute install is about as easy
as it gets. The transmitter plugs directly into the power port of your V1,
Passport 8500 or 8500 X-50,
or
9500i. The receiver mounts either inside
or outside your helmet with the flashing LED placed in your peripheral field
of vision. The Passport version also works with the 7500, 6800, and the
Solo S2 as well as. the Beltronics models: RX-65, RX-55, and Vector 995.
Uses watch type batteries. It's us against them, my friends! Spare batteries
available! Pirates' Price $165.US V1 or Passport (Fed/Ex Ground in US Included) |
![]() |
K1200R
SportBikeCam Mount Great for the street or track, the gas
cap mounted mounting system provides a solid platform for your video camera
or still digital or 35mm camera to capture stunning images to show your
friends. The adjustable pivot mount lets you get that shot just right. A
vibration dampening pad is also included. You can move the camera forward
or back on the extension arm using multiple mounting holes. The SportBikeCam
design allows you to fill your tank with no hassle. The camera can be removed
in seconds with the supplied knob at a rest stop or end of the day. The
back of the tank bracket is relieved so it won't scratch your tank. Camera
not included! Fits
the BMW K1200S, K1200R, K1200R Sport,
and the K1200RS/GT & K1100. Pirates' Price $130.US (Fed/Ex Ground in US Included) |
|
BMW K1200R / R SPORT LIGHTING & SAFETY ENHANCEMENTS
|
![]() |
LED V1 Taillight
Your factory tail light is an abomination
to all mankind and most of the known universe. There I've said it. Disagree
with me and you're wrong. The LED V1 Taillight we import from Pack Parts
of Germany is simply a thing of beauty and is guaranteed to turn that
baboon-looking rear-end into an ass Jessica Alba would envy. Much
brighter than stock. The Plug-n-play kit includes a white LED-light for
license plate. Street legal in Europe. Delivered unpainted, white. Worthy
of the mighty K1200R or R Sport. I only wish this fit my
K1200S. Fits
the BMW K1200R and K1200R Sport Only. |
![]() |
Kisan
Sequential LED License Plate Frame Imagine this.. a sleek black license plate frame with Sequential
Turn Signals (with Amber LED's), a flashing Brake
Light Modulator, and Running Lights (with Red LED's) all on the same unit. Kisan delivers big with this easy
to install accessory light guaranteed to get that cell phone wielding, french
fry eating asshole's attention that's coming up behind you. Designed to
accept the most commonly used 7-1/2" license plates. and yes.. the
Can-Bus/ABS compatible Kisan Sequential LED License Plate Frame can be mounted
with the LED arrays on top or bottom of the license plate. This is what
I have on my own K1200S. Fits the BMW K1200R, K1200R Sport, K1200S, K1200RS/GT,
06 K1200GT, R1200GS, and virtually every other motorcycle. Pirates' Price $125.US (Fed/Ex Ground in US Included) |
![]() |
Lite
Blazer License Plate Frame from Run-N-Lites The 3 rows of high intensity
LED's used in the Lite-Blazer license plate mounted light bar will definitely
get the attention to vehicles several hundred feet behind you. The outside
LED's burn RED all the time as running lights,
like Lite Buddy's and the center LED's are a solid stop light (it is slightly brighter then
the running lights). When the brakes are applied, the built in flasher causes
the outer clusters to flash 6 – 7 times and remain on solid after that,
so you do not piss off the bubba/ex-SEAL/Postal employee sitting behind
you. The light bar frame is black. Easy install. Make sure those french
fry eating, cell phone hugging, cage demons can see you when you are stopped.
Fits EVERY BMW. For
a Video MPG of the Lite Blazer in Action... Click HERE Pirates' Price $72.US (Fed/Ex Ground in US Included) |
![]() |
K1200R Lite Buddy's
The US-made Lite Buddy's are super bright LED's
that go inside your factory rear turn signal housings. You get
24 LEDs per side! They offer one solution
to front or rear visibility (or lack thereof) for your BMW K1200S or R.
The FRONT kit burns amber all the time. The REAR kit burns a bright RED at all times and 16 of the LED's burn amber when the turn signals are used. Very unobtrusive. Easy install with no mods or drilling. Increase your rear
visibility by 200%. And for those who want running lights AND flashing brake
lights we also offer the optional Stop Alert which when used with the Lite
Buddy's will flash 6-7 times when your brakes are applied and then go back
to running lights. and lastly.. NO.. there are no ABS or Can-Bus issues!!! Plug-N-Play! Fits the BMW
K1200R, K12--R Sport, K1200S, R1200GS, the GS/Adv, and the F800ST. Pirates' Price $93.US (Fed/Ex Ground in US Included) |
![]() |
K1200R
Clear Taillight Assembly from Clear
Alternatives These clear taillight housings are a direct replacement
fit to the original stock K1200S and/or K1200R units requiring no modifications.
Both
are plug and play 10 minute install with zero issues with your foofoo brake/electronic
systems. The
taillights are chrome plated on the inside and have a re-designed lens for
super reflectivity. You
want a brighter tail light?? We've got your back! Clear Alternatives offers TWO versions of the KRS Clear Tail light.
..One with a full bank of RED burning
LED's and one with a standard Red burning bulb.
Expect 100% increase in brightness over stock. . Legal
in all 50 states! Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $100.US LED / $70.US NON-LED (Fed/Ex Ground Included) |
![]() |
Stebel
Magnum Horn
Unlike dual Fiamms or large air horns, the 136 dB Stebel
Magnum is designed for bikes where space is at a premium like the
BMW K1200S. This is the horn I have on my S for this very reason. The Magnum
fits in place of the OEM horn and is connected in minutes using basic wiring
skills. While the Stebel is much louder than the factory horn, it is not
as loud as dual horns or an air horn, however the install is 100% easier
than these other type horns and it takes up 1/2 the space. Wiring is as
easy as removing the 2 wires from your factory horn and connect them to
the Magnum. The
Stebel Magnum is small enough at 85mm x 90mm
x 60mm to fit onto your K1200R, K1200S, R1200GS, R1200RT, R1200ST, and virtually
any modern motorcycle. Also includes: fitment bracket. Pirates' Price $43.US (Fed/Ex Ground in US Included) |
|
HANDLING
|
![]() |
Marc
Parnes K1200R / R Sport Wheel Balance Kit Some of us choose to mount
and balance our own tires.. Why? Because we hate to pay the local extortionist..
er.. dealer $60 a pop to mount, scratch, and balance our tires. Of all the
balance kits on the market, this is the one I own and use. The MP kit comes
complete with a hardened steel axle, bearing blocks, (1) universal cone
and (1) special BMW rear drive side cone.. Everything CNC machined out of
billet 6061-T6 aircraft aluminum. User supplies two support stands of equal
heights to support the balancer and wheel. Any milk crates, cylinder blocks,
or jack-stands work perfectly. Factory rear wheel adapter is NOT needed
with this kit. Stick-On weights included! Pirates' Price $150.US Kit (US Priority Shipping in US Included) |
|
BMW
K1200R / R SPORT ENHANCEMENTS |
|
Billet
Aluminum Gas Cap A Pirates' Lair Exclusive! Imported
from Oberon Machine in the UK. Up until now, you
could buy a billet gas cap for just about
any bike in the universe except for.. yep.. you guessed it... a BMW. No
idea why.. Are we not worthy? You've seen them on race bikes around the
world now you can have one for your BMW. This is a direct replacement
for your factory fuel filler cap and includes stainless steel fasteners.
In case you are wondering.. No.. they don't lock.. and neither do the
gas caps on any 4-wheeled vehicle you own so for gods sake.. unless you
live in an area with roving bands of petrol thieves willing to risk 2
years in jail for $9 worth of gas...Relax and fagetaboutit. We offer these in Silver or Black. These should
fit the K1200S, K1200R, K1200R Sport, K1200RS, early K1200GT and probably
many more BMW's.. Is this beeeautiful or what?? Pirates' Price $136.US Kit (Fed/Ex Ground in US Included) |
![]() |
Pirates'
Lair Custom K1200R Torque Arm A Pirates' Lair Exclusive! Our in-house design replacement torque arm is absolutely stunning. Supremely sleek, the ultra light weight CNC'd aluminum arm is a simple
bolt-on replacement for that piece of crap Germany stuck on us. Our arm,
which tastefully features the Pirates' Lair logo, does NOT change bike
geometry so there are no warranty issues. It's the same 415mm as the factory
arm. Install is as easy as removing the two bolts on the bike and replacing
your arm with ours using the furnished stainless steel low-head socket
bolts. Truly
worthy of the K1200S or R. We
have both silver and anodized black arms to fit your bike's
needs. Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $210.US Blk or Silver (Fed/Ex Ground in the US included) |
![]() |
Evoluzione
License Plate Relocator This simple anodized 5052-h32
aluminum bracket allows you to easily clean up the tail end of your K1200S
or R by cleanly removing the large rear reflectors. This kit comes complete
with stainless steel mounting hardware and provides for the mounting of
the stock illumination light. Quality is first rate. I took before and after
measurements and the new position puts the license plate light EXACTLY 1
7/8th's more inward... meaning.. the bike is now almost 2 full inches shorter..
While the change isn't visually drastic... it is much sleeker and actually
still looks factory. Instructions are VERY easy to understand (with pictures)
and the install itself took me less than 20 minutes. Fits
the BMW K1200S, K1200R, and K1200R Sport. Pirates' Price $48.US (Fed/Ex Ground in the US included) |
![]() |
Verholen
Rear K1200R / R Sport Hubcaps These are just too cool!! The kit includes
caps for both sides. German quality is typical first rate. The caps install
in 2 minutes and add a simple beauty to the rear wheel. The arrangement
of the vents result in higher air flow, positively adding to inner air flow
and cooling. The cover is fastened with a threaded expansion holder. BMW
emblem, part number 2328447 (pic at left), is included free of charge in
case you'd prefer it to the Black/Silver MV emblem.. Paintable/powder coatable
for those with colored wheels.. Fits the K1200R, K1200R Sport, K1200S,
& R1200GS/RT/ST Pirates' Price $85.US (Fed/Ex Ground in the US included) |
|
TRAILER,
SHOP, & PADDOCK
|
![]() |
Baxley Sport Chock is a unique, patented wheel chock designed
with the sport bike enthusiast in mind. This is a simple, lightweight chock
that will securely hold your sport bike upright by simply riding or pushing
the bike into the chock. Either in your garage, on your trailer, or in the
back of your truck. For Racers this is the perfect stand to leave in the
pits so you can ride in and get off your race bike. Designed for any bike
with 120 x 17" front tires, which is just about every sport bike on
the market including the BMW K1200R. .Another great benefit of using the
Baxley Chock is that no front tie downs are necessary
when trailering. Just secure the rear of the motorcycle with straps
and the chock does the rest. Never bottom out your forks again.Choice of
colors... Standard Black or special order colors of Red, Blue, Yelow, Green, and Black Chrome. Trailer mounting hardware as an option
This link is into our MV section.... Pirates' Price $275.US (Fed/Ex shipping in the US included) |
![]() |
K1200R
/ R Sport Pit-Bull Rear Motorcycle Stand
Pirates' Lair is proud to offer our K1200S and K1200R customers the finest
wheel stand on the market.. the Pit Bull. Pissed off that the Germans didn't
include a freakin' centerstand? I feel ya, my brothers but here's a solution.
The One-Armed Rear Wheel Stand fits both bikes
and offers great leverage and stability and the ball
bearing head makes it easy to spin the wheel for cleaning or tire
changing. Easy one-man operation. The forward handle rear stand offers space
saving for garage/display/work table/lift. . and it's bulletproof.. Sold
complete and remember our prices INCLUDE drop-shipping directly from the
manufacturer for quicker delivery. Pirates' Price Rear $175.US (Fed/Ex shipping in the US included) |
![]() |
K1200R
Pit-Bull Front Motorcycle Stand
Pirates' Lair is proud to offer our K1200S and K1200R customers the finest
wheel stand on the market.. the Pit Bull. Pissed off that the Germans didn't
include a freakin' centerstand? I feel ya, my brothers but here's a solution.
The Forklift Front Stand fits both bikes and
offers great leverage and stability and the easy swivel,
rubber coated ends makes it easy to spin the wheel for cleaning
or tire changing without fear of scratching your fine machine. Easy one-man
operation. Bulletproof construction.. Sold complete and remember our prices
INCLUDE drop-shipping directly from the manufacturer for quicker delivery.
Pirates' Price Rear $160.US (Fed/Ex shipping in the US included) |
|
BMW K1200R / R SPORT ACCESSORIES & GEAR
|
![]() |
"Engage"
Quick-Lock Tankbag Imported from Germany! One
thing we have never sold at Pirates Lair is a full
or midsize tank bag. I've never been a big fan of them nor have I ever found
one "worthy" of our product line.. Until now. The Bags-Connection
"Engage" Quick-Lock Tankbag is the sweetest looking German
tankbag I've ever seen. It's a midsize bag designed to fit the K1200RS,
K1200GT, K1200S, K1200R, and R Sport. It comes with a quick-release gas-cap
mounting system.. no straps.. no magnets.. no adhesive panty strips. Pull
one pin and the bag lifts off. The tankbag itself never even touches your
gas tank due to the gas cap mounting system, but instead hovers over it
with about 1/4" clearance so there's no worries about scratching your
paint. Rain cover is included. Trust me.. this bag is cooler than freon.
I deem this one worthy. Pirates' Price $185.US. (Fed/Ex Ground in US Included) |
![]() |
ZTechnik Storage Pod Looking for a sleek alternative to a clunky tankbag? Witness the ZTechnik Storage Pod. In addition to the main compartment, four zippered storage areas (three main areas and one document holder) are attached to a cleverly designed removable inner tray. On the top of the tray, the three generously sized zippered pockets hold a large number of items. Stuff them all and fill the top cavity of the pod, or remove the tray altogether to open the space into one very large main storage area. The Velcro hinge makes removal of the tray a snap. Sturdy double zippers keep everything secured inside while the pod's web straps and coated hooks attach it to the bike. ZTechnik included plenty of length in the web straps to make mounting the bag -- under the seat, to the rear tail cowling, or through a rack -- an easy process. SIZE H: 6.0-4.5" front to back x W: 12.5-9.0" front to back x L: 13.75" ZTechnik says these will fit any bike including the K1200R, R Sport, K1200S, and the 2006 and up K1200GT Web page coming soon. Pirates' Price $135.US. (Fed/Ex Ground in US Included) Coming Soon! |
![]() |
Verholen
/ Hein Gericke Mini-Tankbag Looking
for a way to carry just a few choice items on your BMW without looking like
a Sherpa? Here's a cool solution.
While this is NOT BMW
or Marsee quality... the design, shape, and lilliputian size of 9" long x 8.5" wide
x 2.75" tall makes these perfect for a book, sandwich, Glock, or phone.
The mounting method is simply ingenious. You simply remove the two opposing
screws from your gas cap ring, replace them with (2) furnished replacement
screws which have little bullet type heads on them, and the bag slots down
and locks onto them. The bag has a soft-rubbery bottom to (in theory) keep
the bag from marring the paint. No straps needed. Tiny map pocket. Shoulder
belt included. This is what I use on my bike. Extra pins available for the
lucky bastages with more than one BMW. Fits ALL BMW's Pirates' Price $48.US. (Fed/Ex Ground in US Included) |
![]() |
GIVI
T431 Soft Saddlebags Our holy search is over!! Pirates' Lair is now offering the
coolest soft saddlebags we've seen. As most have heard me rant, I'd rather
submit myself to a prostate exam given by Mike Tyson than pay BMW $600+
for their foofoo, sissy hard luggage option for my K1200S. The GIVI's are
the perfect size for a weekend run (11"x 18"x 11" ea) and
offer more exhaust canister clearance than any other of the soft bags we've
tested for a much sleeker look. They actually look good on virtually every
bike we've tried them on! While looking uber-chic when zipped up, they also
expand to offer a total capacity of 20 liters ea.. or so they claim. The
GIVI T431's are constructed using a new textile that imitates carbon fiber.
We offer these in black only. Rain covers included! Trust me.. you're gonna
love these. I do. Pirates' Price $155.US. (Fed/Ex Ground in US Included) |
![]() |
Stealth Soft Luggage by T-Bags Pirates Lair offers
2 choices of accessory luggage for your Corbin
Backrest. The Roll Bag and the Universal Helmet Bag. Both slide down over the backrest via a tailored sleeve and then lock securely
into place with quick release clips. If two-up, have the bag sitting behind
your passenger. If solo, flip it around and have it sit behind you for better
weight distribution. Both offer EASY access and a rigid design including
a semi-hard bottom so they maintain shape when empty thanks to dual wall
construction. Waterproof? Yes, when used with the custom tailored inner
rain sleeves. and yes.. BOTH bags come standard with it’s own rain liner. Pirates' Price $145.US Roll bag & $178.US Universal Helmet Bag (Fed/Ex Ground in US Included) |
![]() |
K1200R
Easy Helmet Lock A Pirate's Lair Exclusive!
Ever wonder why your $17,000 bike doesn't come with a halfway decent
helmet lock? Go figure. Hate the looks of those "fugly" license plate helmet
locks? The lock and mechanism are made by BMW. Take the new lock to any
BMW dealer and they can key it to your foofoo electronic key. The mounting bracket, which will fit both the "S" and "R,"
is produced here in the US by a fellow K12 rider. We package the bracket
and lock together and sell it as an easy install kit. Install time is about
10 minutes and it will look factory. We offer these in TWO colors.. Silver
(for the bikes with the silver frame) and Black (for the bikes with the
black frames. We suggest customers install on the left side of the bike..
away from the helmet cooking exhaust. Manufactured for Pirates' Lair. Pirates' Price $85.US Blk / $89.US Silver (Fed/Ex shipping in the US included) |